Search

UncommonCate

Crafts and Art: Cloth, Paint, Leather, Food, and More…

Tag

archery

Leather Belt Bag

quiver41quiver44

quiver38This lovely little bag was made to match the Leather Quiver from last post. It functions as either a belt bag or as a quiver bag. It was made to be a quiver bag for the most part, but I have found myself wearing it as a trendy little purse alternative instead. At about six by six inches, it is perfect for a cell phone and wallet.

quiver29quiver30

 

It began as six pieces. The front, the back (identical to the back), the closure flap (identical to the front and back except slightly shorter), the belt loops, and the sides and bottom strip. I began by sewing the belt loops to the back panel (saddle stitch as usual).

quiver31Next, I attached the closure flap to the back panel. The belt loop tops are sewn into the same seam as the closure flap.

quiver32quiver33

The front and back panels were sewn to the sides and bottom strip inside out. I then turned the bag, hiding the seam and creating a more rounded look.

quiver37quiver36quiver35quiver34

A button loop and antler button finish off the bag.

     quiver39 quiver40 quiver42 The bag can now be worn at the belt or it can be attached to the quiver by a small strap. The strap is narrow enough to fit under the side lace of the quiver to hold it securely in place. I considered using a small buckle on the strap, but I decided to go low tech. As an adjustable buckle alternative, I punched holes along the strap and then used a piece of lace to tie through the holes, holding the strap at the proper length.

quiver47quiver45

Leather Quiver

quiver01quiver02

quiver03quiver04

I tried to make this quiver versatile for use in different environments. The top angle is meant to shed rain and natural forest debris as well as to protect the fletchings from general wear and tear. Since having the arrows totally covered is not as convenient when actually shooting, I decided to design for the top to be folded down for easier access when shooting. On a similar train of thought, I like to carrying a back quiver, but shooting from a belt quiver. So, I made sure to make straps that allow the quiver to be switched from one type of carry to the other quickly and easily.

quiver2

A plan was, as always, the first step. Dimensions were next. My arrows are around 28 inches, so I made the apex of the top 30 inches to completely cover the arrows. The circumference of the bottom is about 10 inches.

quiver1

I sketched out a cutting pattern on some big paper. The leather is oil tanned cow hide, which has a really nice color and texture.

quiver3quiver7

quiver5quiver6

quiver8quiver9

For decoration I decided to applique a pattern on the outer surface. It is in no way functional, but I think it looks cool and adds some dimensionality. I cut out the decorative applique from the scraps around the edges. Because this is a repetitive pattern, I made a pattern for each of the five types pieces with the stitches marked so that they would all look the same.  After laying out the pattern on the main quiver piece, I lightly marked where each piece went and labeled each place and piece with a corresponding letter to ensure that each piece ended up where it was meant to be. Each piece was then saddle stitched down.

quiver10quiver21

To close the sides, I punched a matching line holes along each edges and then laced the side up, tying the lace off at the top on the inside.

quiver13quiver11

quiver12quiver14

The bottom is a slightly squared oval. I made a paper model first, and then trimmed it down until it matched the bottom of the quiver. I then cut a leather version. The edge is once again held together with a saddle stitch. The sure up the side closure, I made sure to catch the end of the side lace in the seam at the bottom.

quiver15 quiver16 quiver17 quiver18

The straps are one inch wide with a buckle to allow the length to be adjusted and clips on the ends to allow the strap to be remove easily. The clips strap attachments are a quarter inch narrower than strap, so the strap is tapered in to accommodate this. A small loop, about 6 inches around, is attached to the top clip of the shoulder strap. This is used to suspend the quiver from a belt. 

quiver24 quiver25 quiver26 quiver27 

To make the quiver shorter for shooting ease, the top shoulder strap clip is un-clipped, the top is folded down, the D-ring to which the shoulder strap clips is passed through a slit in the quiver top, and finally the clip is re-clipped creating a whole different style. Either style can be carried at the back or the belt.

quiver03quiver04quiver01 quiver02 

Matching belt bag coming soon…   

Create a free website or blog at WordPress.com.

Up ↑